LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2008 >> Escalade RWD >> Repair and Diagnosis >> Body & Frame >> Seats >> Seat Hardware, Seat Trim And Upholstery >> Repair Instructions >> Rear Seat Number 2 Back Cushion Latch Cable Replacement

Rear Seat Number 2 Back Cushion Latch Cable Replacement

Fig 1: View Of Rear Seat No. 2 Back Cushion Latch Cable Assembly
GM1683933Courtesy of GENERAL MOTORS CORP.
Callout Component Name

Preliminary Procedure

  1. Remove the rear seat. Refer to Rear Number 2 Seat Replacement (Tahoe/Yukon/Escalade)  or Rear Number 2 Seat Replacement (Suburban/Yukon XL) .
  2. Remove the rear seat cushion trim covers. Refer to Rear Seat Number 2 Cushion Panel Replacement (AS3)  or Rear Seat Number 2 Cushion Panel Replacement (AW2) .
1 Rear Seat #2 Back Cable Assembly