Rear Seat Number 2 Back Cushion Hinge Finish Cover Replacement (AW2)

Fig 1: View Of Rear Seat No.2 Back Cushion Hinge Finish Cover & Screw

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
1	Rear Seat No. 2 Back Cushion Hinge Finish Cover Screw NOTE: Refer to Fastener Notice . Tighten: 2 N.m (18 lb in)
2	Rear Seat No. 2 Back Cushion Hinge Finish Cover Tip: Tilt the opposite seat forward to allow access to the inner finish cover. Pull away from the seat to disengage the integral retainers.