Rear Seat Latch Release Handle Replacement (Rear No. 2)

Fig 1: View Of Rear Seat Latch Release Handle Assembly & Nut

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedure Remove the rear seat. Refer to Rear Number 2 Seat Replacement (Tahoe/Yukon/Escalade) or Rear Number 2 Seat Replacement (Suburban/Yukon XL) . Remove the lower finish cover. Refer to Rear Seat Number 2 Cushion Panel Replacement (AS3) or Rear Seat Number 2 Cushion Panel Replacement (AW2) .
1	Rear Seat Latch Release Handle Nut (Qty: 2) NOTE: Refer to Fastener Notice . Tighten: 9 N.m (80 lb in)
2	Rear Seat Latch Release Handle Assembly

Callout

Component Name

Preliminary Procedure

Rear Seat Latch Release Handle Nut (Qty: 2)

NOTE: Refer to Fastener Notice .

Tighten: 9 N.m (80 lb in)

Rear Seat Latch Release Handle Assembly