Wheelhouse Panel Replacement - Right Side (HP2)

Fig 1: View Of Right Side Wheelhouse Panel

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedure:  Remove the appropriate tire and wheel assembly. Refer to Tire and Wheel Removal and Installation .
1	Front Wheelhouse Liner Bolt/Screw (Qty: 4) NOTE: Refer to Fastener Notice . Tighten:  2 N.m (18 lb in)
1	Front Wheelhouse Liner Plastic Retainer (Qty: 13)
2	Front Wheelhouse Liner Tip:  Disconnect any electrical connectors.