Front Seat Cushion Frame Replacement (without HP2)

Fig 1: View Of Front Seat Cushion Frame & Components

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedure: Remove the front seat. Refer to Front Seat Replacement - Bucket (without HP2) or Front Seat Replacement - Bucket (with HP2) .
1	Front Seat Adjuster Outer Finish Cover Refer to Front Seat Cushion Outer Trim Panel Replacement (with HP2) or Front Seat Cushion Outer Trim Panel Replacement (Manual Seat without HP2) or Front Seat Cushion Outer Trim Panel Replacement (Power Seat without HP2) .
2	Front Seat Adjuster Inner Finish Cover Refer to Front Seat Cushion Inner Trim Panel Replacement (with HP2) or Front Seat Cushion Inner Trim Panel Replacement (without HP2) .
3	Front Seat Riser Finish Cover Procedure: Pull rearward to disengage the cover from the seat riser.
4	Seat Back Frame Bolt (Qty: 4) NOTE: Refer to Fastener Notice . Tighten: 9 N.m (80 lb in)
5	Seat Cushion Cover and Pad Refer to Seat Cushion Trim Cover and Pad Replacement (with HP2) or Seat Cushion Trim Cover and Pad Replacement (without HP2) .
6	Front Seat Cushion Frame Nut (Qty: 4) Refer to Front Seat Adjuster Replacement (with HP2) or Front Seat Adjuster Replacement (without HP2) . Tighten: 9 N.m (80 lb in)
7	Heated Seat Module Procedure: Disconnect the electrical connector.
8	Front Seat Cushion Frame Tip: If working on the passenger seat, remove the inflatable restraint passenger presence system. Refer to Inflatable Restraint Passenger Presence System Replacement - Front (without HP2) or Inflatable Restraint Passenger Presence System Replacement - Front (with HP2) .