LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2008 >> Escalade RWD >> Repair and Diagnosis >> Accessories & Equipment >> Interior/Exterior Trim >> Seat Hardware, Seat Trim And Upholstery >> Repair Instructions >> Front Seat Back Frame Replacement (except HP2)

Front Seat Back Frame Replacement (except HP2)

Fig 1: Identifying Front Seat Back Frame Components (Except HP2)
GM1950027Courtesy of GENERAL MOTORS CORP.
Callout Component Name

Preliminary Procedure

  1. Remove the front seat back cushion cover and pad. Refer to Front Seat Back Cushion Cover and Cushion Pad Replacement (with HP2)  or Front Seat Back Cushion Cover and Cushion Pad Replacement (without HP2) .
  2. Remove the front seat cushion cover and pad. Refer to Seat Cushion Trim Cover and Pad Replacement (with HP2)  or Seat Cushion Trim Cover and Pad Replacement (without HP2) .
1 Front Seat Back Frame Bolt (Qty: 4)
NOTE: Refer to Fastener Notice .

Tighten:  50 N.m (37 lb ft)
2 Front Seat Back Frame

Procedure

  1. Disconnect the electrical connector, if equipped.
  2. When replacing the seat back frame transfer components as necessary.
scientia non olet · About LEMON Manuals