1-2-3-4 Clutch Piston Installation
1-2-3-4 Clutch Piston Installation
| Callout | Component Name |
|---|---|
| 1 | 1-2-3-4 Clutch Piston |
| 2 | 1-2-3-4 Clutch Spring
NOTE:
Ensure the clutch spring is centered on the piston with the tabs facing up. Failure to do so may cause damage to the clutch assembly.
|
| 3 | 1-2-3-4 Clutch Piston Dam Assembly Tip: Lubricate the inner and outer surfaces of the dam assembly with ATF in order to ease installation into the piston. Install the tabs facing up. |
| 4 | 1-2-3-4 Clutch Piston Dam Retaining Ring
NOTE:
Use care when compressing the 1-2-3-4 clutch spring and dam assembly. Compressing the dam assembly too much may damage it.
NOTE:
Refer to Retaining Ring Reuse Notice
. Special Tool: J 38734 Intermediate Spring Compressor Adapter. See Special Tools . |