LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2008 >> Escalade EXT >> Repair and Diagnosis >> Engine Mechanical >> Engine Exhaust System >> Repair Instructions >> Exhaust Muffler Insulator, Hanger, and Bracket Replacement (1500 - LC9/LMG/LY5/L76) >> Removal Procedure

Removal Procedure

CAUTION: Refer to Exhaust Service Caution .
CAUTION: Refer to Protective Goggles and Glove Caution .
  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
    IMPORTANT: Service the exhaust hangers individually in order to retain the support of the exhaust system.
    2. Fig 1: View Of Exhaust System Insulators
    GM1709436Courtesy of GENERAL MOTORS CORP.
    IMPORTANT: Do not use oil base lubricants.
  2. Apply a soapy solution to the following in order to ease the removal of the hanger (1):
    • The frame support bracket rod (2)
    • The exhaust pipe hanger rod (3)
  3. Pry the exhaust pipe hanger (1) free from the following:
    • The frame support bracket rod (2)
    • The exhaust pipe hanger rod (3)
scientia non olet · About LEMON Manuals