Front Bumper Fascia Replacement (Yukon)

Fig 1: View Of Front Bumper Fascia & Components

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedure: Remove the front wheelhouse liners. Refer to Front Wheelhouse Liner Replacement - Left Side and Front Wheelhouse Liner Replacement - Right Side .
1	Front Fender Bracket Bolt (Qty: 4) NOTE: Refer to Fastener Notice . Tighten: 7 N.m (62 lb in)
2	Front Fascia To Impact Bar Brace Bolt (Qty: 2) Tighten: 10 N.m (89 lb in)
3	Front Fascia To Radiator Core Support Bolt (Qty: 6) Tighten: 6 N.m (53 lb in)
4	Front Fascia Tip: Disconnect the fog lamp connectors before attempting removal.