LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2008 >> Escalade EXT >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel System Displays & Gages >> Diagnostic Information and Procedures >> DTC P2068 >> Component Testing

Component Testing

  1. Ignition OFF, remove the secondary fuel level sender.
  2. While sweeping the fuel level sensor through its full range of motion, test for a minimum resistance value of less than 41 ohms and a maximum value greater than 119 ohms between the secondary signal terminal B and the low reference terminal C.
    • If not within the specified range, replace the secondary fuel level sensor.
scientia non olet · About LEMON Manuals