Removal Procedure

WARNING: This page is about a different car, the 2008 GMC Yukon XL, 2008 GMC Yukon, 2008 Chevrolet Tahoe, 2008 Chevrolet Suburban, and 2008 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of Transmission Harness 20-Way Connector & VSS Electrical Connector

Courtesy of GENERAL MOTORS CORP.

Raise and suitably support the vehicle. Refer to Lifting and Jacking the Vehicle .
Disconnect the vehicle speed sensor (VSS) electrical connector (2).

Fig 2: View Of VSS, Bolt & O-Ring Seal

Courtesy of GENERAL MOTORS CORP.

Remove the VSS bolt (2).
Remove the VSS (1).
Remove the O-ring seal (3).