Torque Converter Cover Replacement

WARNING: This page is about a different car, the 2008 GMC Yukon XL, 2008 GMC Yukon, 2008 Chevrolet Tahoe, 2008 Chevrolet Suburban, and 2008 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of Torque Converter Covers & Bolts

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedures: Raise the vehicle. Refer to Lifting and Jacking the Vehicle .
1	Torque Converter Cover Bolt NOTE: Refer to Fastener Notice . Tighten: 10 N.m (89 lb in).
2	Torque Converter Cover Tip: Remove the starter. Refer to Starter Motor Replacement .
3	Torque Converter Cover Bolt Tighten: 10 N.m (89 lb in).
4	Torque Converter Cover