Removal Procedure

WARNING: This page is about a different car, the 2008 GMC Yukon XL, 2008 GMC Yukon, 2008 Chevrolet Tahoe, 2008 Chevrolet Suburban, and 2008 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Reaction Carrier Components

Courtesy of GENERAL MOTORS CORP.

Remove the reaction carrier shaft/internal gear retainer (668) and the reaction carrier shaft (666) from the input internal gear (664).
Inspect the reaction carrier shaft (666) and the input internal gear (664) for the following defects:
- Scoring
- Cracking
- Damaged or worn bushings
- A cracked shaft
- A damaged spline
- Damaged gear teeth

Fig 2: Removing Reaction Carrier Shaft Front Bushing

Courtesy of GENERAL MOTORS CORP.

UsingJ 29369-2 with J 23907 , remove the reaction carrier shaft front bushing (665). See Special Tools .

Fig 3: Using J 25019-14 & J 25019-14 To Remove Reaction Carrier Shaft Rear Bushing

Courtesy of GENERAL MOTORS CORP.

UsingJ 25019-14 with J 7004-A , remove the reaction carrier shaft rear bushing (667). See Special Tools .