LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2008 >> Escalade AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 105 (Automatic Transmission - 4L60-E/4L65-E/4L70-E - Removal & Installation, Service, Overhaul, Troubleshooting & Diagnosis) >> Repair Instructions - Off Vehicle >> Reaction Carrier Shaft Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2008 GMC Yukon XL, 2008 GMC Yukon, 2008 Chevrolet Tahoe, 2008 Chevrolet Suburban, and 2008 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Installing Reaction Carrier Shaft Front Bushing
    GM5476Courtesy of GENERAL MOTORS CORP.
  1. Using J 34196-3 which is part of kit J 34196-B  with J 8092  , install a new reaction carrier shaft front bushing (665).
  2. Fig 2: View Of Reaction Carrier Shaft Rear Bushing
    GM5477Courtesy of GENERAL MOTORS CORP.
  3. Using J 34196-3 which is part of kit J 34196-B  with J 8092  , install a reaction carrier shaft rear bushing (667).