LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2008 >> Escalade AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 105 (Automatic Transmission - 4L60-E/4L65-E/4L70-E - Removal & Installation, Service, Overhaul, Troubleshooting & Diagnosis) >> Repair Instructions - Off Vehicle >> Oil Pump Disassemble

Oil Pump Disassemble

WARNING: This page is about a different car, the 2008 GMC Yukon XL, 2008 GMC Yukon, 2008 Chevrolet Tahoe, 2008 Chevrolet Suburban, and 2008 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Thrust (Pump To Drum) Washer
    GM1887597Courtesy of GENERAL MOTORS CORP.
  1. Remove the thrust (pump to drum) washer (601).
  2. Fig 2: Identifying Pump Cover Bolts
    GM1552936Courtesy of GENERAL MOTORS CORP.
  3. Remove the pump cover bolts (233).
  4. Remove the pump cover (215) from the pump body (200).