Inner Manual Linkage Removal

WARNING: This page is about a different car, the 2008 GMC Yukon XL, 2008 GMC Yukon, 2008 Chevrolet Tahoe, 2008 Chevrolet Suburban, and 2008 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Inspecting Inner Manual Linkage

Courtesy of GENERAL MOTORS CORP.

Remove the following parts:
1. Hex head nut (90)
2. Manual valve link (89)
3. Detent lever (88)
4. Parking lock actuator assembly (85)
5. Manual shaft retainer (83)
6. Manual shaft (84)

Fig 2: Removing Manual Shaft Seal

Courtesy of GENERAL MOTORS CORP.

Remove the manual shaft seal (82) with a screwdriver.

Fig 3: View Of Parking Lock Bracket & Bolt

Courtesy of GENERAL MOTORS CORP.

Remove the following components:
1. The parking lock bracket bolt (87)
2. The parking lock bracket (86)