3-4 Clutch Plate Travel Check
WARNING: This page is about a different car, the 2008 GMC Yukon XL, 2008 GMC Yukon, 2008 Chevrolet Tahoe, 2008 Chevrolet Suburban, and 2008 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
- Use feeler gauges to check the 3rd and 4th clutch plate travel.
- Check the travel between the selective backing plate (655) and the first fiber plate assembly (654A).
The 3rd and 4th clutch plate travel should be:
Specification:
- Five plate - 0.99-2.14 mm (0.038-0.084 in)
- Six plate - 0.90-2.10 mm (0.035-0.082 in)
- Seven plate - 1.12-2.04 mm (0.044-0.080 in)
- Select the proper 3rd and 4th clutch selective backing plate to obtain the correct travel. Refer to Third and Fourth Clutch Backing Plate Selection .