LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2008 >> Escalade AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 105 (Automatic Transmission - 4L60-E/4L65-E/4L70-E - Removal & Installation, Service, Overhaul, Troubleshooting & Diagnosis) >> Repair Instructions - Off Vehicle >> 2-4 Band, Input Clutches, Input Gear Set Removal

2-4 Band, Input Clutches, Input Gear Set Removal

WARNING: This page is about a different car, the 2008 GMC Yukon XL, 2008 GMC Yukon, 2008 Chevrolet Tahoe, 2008 Chevrolet Suburban, and 2008 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Identifying Band Anchor Pin
    GM1552920Courtesy of GENERAL MOTORS CORP.
  1. Remove the band anchor pin (41).
    2. Fig 2: Identifying Reverse Input Clutch Assembly & Input Housing
    GM1552921Courtesy of GENERAL MOTORS CORP.
  2. Remove the input housing and shaft assembly (621), along with the reverse input clutch housing and drum assembly (605).
    3. Fig 3: View Of 2-4 Band Assembly
    GM190436Courtesy of GENERAL MOTORS CORP.
  3. Remove the 2-4 band assembly (602).
scientia non olet · About LEMON Manuals