LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2008 >> Escalade AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 105 (Automatic Transmission - 4L60-E/4L65-E/4L70-E - Removal & Installation, Service, Overhaul, Troubleshooting & Diagnosis) >> Repair Instructions - Off Vehicle >> 2-4 Band Servo 2nd Apply Piston Disassemble >> Disassemble

2-4 Band Servo 2nd Apply Piston Disassemble: Disassemble

WARNING: This page is about a different car, the 2008 GMC Yukon XL, 2008 GMC Yukon, 2008 Chevrolet Tahoe, 2008 Chevrolet Suburban, and 2008 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Locating Servo Cushion Outer & Inner Spring With Retainer
    GM55932Courtesy of GENERAL MOTORS CORP.
  1. Use a J 22269-01  to compress the second apply piston assembly (17). See Special Tools .
  2. Remove the second apply piston retaining ring (14).
  3. Remove the servo cushion spring retainer (15), the servo cushion outer spring (16) and the servo cushion inner spring (105) (model dependent).
scientia non olet · About LEMON Manuals