LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2008 >> Escalade AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 105 (Automatic Transmission - 4L60-E/4L65-E/4L70-E - Removal & Installation, Service, Overhaul, Troubleshooting & Diagnosis) >> Repair Instructions - Off Vehicle >> 1-2 Accumulator Disassemble

1-2 Accumulator Disassemble

WARNING: This page is about a different car, the 2008 GMC Yukon XL, 2008 GMC Yukon, 2008 Chevrolet Tahoe, 2008 Chevrolet Suburban, and 2008 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Using Air To Clean Accumulator Housing
    GM1755945Courtesy of GENERAL MOTORS CORP.
    IMPORTANT: Some models may not use an outer 1-2 accumulator spring (54).
  1. Blow air into the 1-2 accumulator housing (57) to remove the 1-2 accumulator piston (56).
  2. Remove the 1-2 inner (104) and outer (54) accumulator springs.
scientia non olet · About LEMON Manuals