Radiator Surge Tank Replacement (Non-HP2)

Fig 1: Radiator Surge Tank (Non-HP2)

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedure Drain the cooling system. Refer to Cooling System Draining and Filling (Static Fill) . Remove the air cleaner assembly. Refer to Air Cleaner Assembly Replacement .
1	Surge Tank Bolt NOTE: Refer to Fastener Notice . Tighten: 10 N.m (89 lb in)
2	Surge Tank Nut Tighten: 10 N.m (89 lb in)
3	Surge Tank Tip: Remove the surge tank hoses from the surge tank.