Instrument Panel Electrical Center or Junction Block Replacement - Left Side

Fig 1: View Of Left I/P Electrical Center/Junction Block

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedure: Remove the instrument panel (I/P) knee bolster. Refer to Knee Bolster Replacement (Except Cadillac) or Knee Bolster Replacement (Cadillac) .
1	Left I/P Electrical Center/Junction Block Procedure Disconnect all electrical connections. Release the plastic retaining tab to loosen the electrical center and maneuver out of I/P area.

Callout

Component Name

Preliminary Procedure:
Remove the instrument panel (I/P) knee bolster. Refer to Knee Bolster Replacement (Except Cadillac) or Knee Bolster Replacement (Cadillac) .

Left I/P Electrical Center/Junction Block

Procedure

Disconnect all electrical connections.
Release the plastic retaining tab to loosen the electrical center and maneuver out of I/P area.