Rear Seat Riser Finish Cover Replacement (Tahoe/Yukon/Escalade w/Split Bench)

Fig 1: View Of Rear Seat Riser Finish Covers & Screws

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedures Flip and fold the rear seat forward. Remove the rear seat floor filler trim cover.
1	Rear Seat Riser Finish Cover Screw (Qty: 2) NOTE: Refer to Fastener Notice . Tighten: 2 N.m (18 lb in)
2	Rear Seat Riser Finish Cover (Qty: 2)
3	Rear Seat Riser Finish Cover (Qty: 2)