Rear Seat Riser Finish Cover Replacement (Tahoe/Yukon/Escalade w/Bucket)

Fig 1: View Of Rear Seat Riser Finish Covers & Screw

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedures Flip and fold the rear seat forward. Remove the rear seat floor filler trim cover.
1	Rear Seat Riser Finish Cover Screw NOTE: Refer to Fastener Notice . Tighten: 2 N.m (18 lb in)
2	Rear Seat Riser Finish Cover
3	Rear Seat Riser Finish Cover