Front Upper Fascia Support Bracket Replacement

Fig 1: View Of Front Upper Fascia Support Bracket Assembly & Screws

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedure:  Remove the front bumper fascia. Refer to Front Bumper Fascia Replacement (Escalade)  or Front Bumper Fascia Replacement (Tahoe)  or Front Bumper Fascia Replacement (Avalanche)  or Front Bumper Fascia Replacement (Z71)  or Front Bumper Fascia Replacement (Yukon) .
1	Front Upper Fascia Support Bracket Bolt (Qty: 6) NOTE: Refer to Fastener Notice . Tighten:  7 N.m (62 lb in)
2	Front Upper Fascia Support Bracket Assembly Tip:  Disconnect the wiring harness retainer from each end if equipped.