LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2008 >> Escalade AWD >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> Bolted Exterior Body Panels And Closures >> Repair Instructions >> Cargo Box Stowage Box Replacement >> Installation Procedure

Installation Procedure

    Fig 1: View Of Body Side Inner Panel Bolts & Cargo Box Stowage Box
    GM1708945Courtesy of GENERAL MOTORS CORP.
    NOTE: Refer to Fastener Notice .
  1. Install the cargo box stowage box (2) to the vehicle.

    Tighten:  Tighten the bolts to 9 N.m (80 lb in).

  2. Install the cargo tie-down rings and bolts to the body side inner panel.

    Tighten:  Tighten the bolts to 9 N.m (80 lb in).

  3. Install the cargo box stowage lid assembly. Refer to Cargo Box Stowage Box Lid Replacement .
  4. Install the lamp socket to the pickup box side courtesy lamp assembly.
  5. Install the assist handle. Refer to Endgate Assist Handle Replacement (Avalanche) .
  6. Install the rear compartment cover assembly. Refer to Cargo Box Front Cover, Center Cover, and Rear Cover Replacement .
scientia non olet · About LEMON Manuals