High Mount Stop Lamp Replacement (GMC Yukon Two-mode Hybrid)
| Callout | Component Name |
|---|---|
| Preliminary Procedure: Remove the liftgate upper applique. Refer to Liftgate Upper Applique Replacement (GMC Yukon Two-mode Hybrid) . |
|
| 1 | High Mount Stop Lamp Assembly Nut (Qty: 2)
NOTE:
Refer to Fastener Notice
.
Tighten: 9 N.m (80 lb in) |
| 2 | High Mount Stop Lamp Assembly Tip: Ensure the high mount stop lamp electrical harness is routed and secured to the back body opening upper applique tabs as removed. |
| 3 | High Mounted Stop Lamp Assembly Tip: There are no serviceable bulbs in the lamp which uses the (LED) light emitting diode for lumination. |