High Mount Stop Lamp Replacement (Avalanche)

Fig 1: View Of High Mount Stop Lamp Assembly, Screws & Clips

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedure:  Remove the center cargo bridge panel. Refer to Cargo Box Bridge Cross Bar Replacement (Escalade EXT) or Cargo Box Bridge Cross Bar Replacement (Avalanche) .
1	High Mounted Stop Lamp Attachment Clips (Qty: 2)
2	High Mount Stop Lamp Assembly Screw NOTE: Refer to Fastener Notice . Tighten:  2 N.m (18 lb in)
3	High Mount Stop Lamp Assembly