LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2007 >> XLR Base >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel System Displays And Gauges >> Diagnostic Information and Procedures >> Instrument Cluster Gages Inoperative >> Circuit/System Testing

Circuit/System Testing

  1. Ignition ON, with the scan tool, perform the IPC Gage Sweep Test in the IPC Output Controls. Verify that all gage dials move from minimum to the maximum value and back to the gage minimum value.
    • If all gages do not perform the IPC Gage Sweep Test, replace the IPC.
scientia non olet · About LEMON Manuals