Stabilizer Shaft Link Replacement (1500 Series)

Fig 1: View Of Stabilizer Shaft Link & Components

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedures Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle . Remove the front wheel and tire. Refer to Tire and Wheel Removal and Installation .
1	Stabilizer Shaft Link Nut NOTE: Refer to Fastener Notice . Tighten: 23 N.m (17 lb ft) Tip: Remove the nut from the stabilizer link.
2	Stabilizer Shaft Link Washer (Qty: 2) Tip: Remove the washer from the link.
3	Stabilizer Shaft Link Insulator (Qty: 4) Tip: Remove the insulators from the link.
4	Stabilizer Shaft Link Spacer Tip: Remove the spacer from the link.
5	Stabilizer Shaft Link Bolt