Inflatable Restraint Vehicle Rollover Sensor Replacement

Fig 1: View Of Inflatable Restraint Vehicle Rollover Sensor & Nuts

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
CAUTION: Refer to SIR Caution . Preliminary Procedures Disable the supplemental inflatable restraint (SIR) system. Refer to SIR Disabling and Enabling . Remove front center floor console, if equipped. Refer to Console Replacement - Front Floor (Cadillac) or Console Replacement - Front Floor (Except Cadillac) . Remove center seat, if equipped. Refer to Seat Replacement - Center .
1	Inflatable Restraint Vehicle Rollover Sensor Nut (Qty: 3) NOTE: Refer to Fastener Notice . Tighten: 10 N.m (88 lb in)
2	Inflatable Restraint Vehicle Rollover Sensor Assembly Tip: Reposition carpet and/or wiring harness in order to access sensor. Disconnect the electrical connectors.

Callout

Component Name

CAUTION: Refer to SIR Caution .

Preliminary Procedures

Disable the supplemental inflatable restraint (SIR) system. Refer to SIR Disabling and Enabling .
Remove front center floor console, if equipped. Refer to Console Replacement - Front Floor (Cadillac) or Console Replacement - Front Floor (Except Cadillac) .
Remove center seat, if equipped. Refer to Seat Replacement - Center .

Inflatable Restraint Vehicle Rollover Sensor Nut (Qty: 3)

NOTE: Refer to Fastener Notice .

Tighten: 10 N.m (88 lb in)

Inflatable Restraint Vehicle Rollover Sensor Assembly
Tip: