Transmission Output Shaft Seal Replacement (Four Wheel Drive)

WARNING: This page is about a different car, the 2009 GMC Sierra, 2009 GMC Cab & Chassis Sierra, 2009 Chevrolet Silverado, and 2009 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of Transmission Output Shaft Seal

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedure: Remove the transfer adapter from the transmission. Refer to the appropriate procedure: Transfer Case Adapter Replacement for the BW 4485-NR3 transfer case Transfer Case Adapter Replacement for the MP 1222/1225/1226-NQG transfer case Transfer Case Adapter Replacement for the MP 1625/1626-NQF transfer case Transfer Case Adapter Replacement for the MP 3023/3024-NQH transfer case
1	Output Shaft Seal Procedure Use the J 45000 to remove the seal. See Special Tools . Use care in order to avoid damaging the output shaft bushing. Lubricate the seal with clean transmission fluid. Use the J 36183 to install the seal. Special Tools J 45000 Seal Remover. See Special Tools . J 36183 Seal Installer

Callout

Component Name

Preliminary Procedure:
Remove the transfer adapter from the transmission. Refer to the appropriate procedure:

Transfer Case Adapter Replacement for the BW 4485-NR3 transfer case
Transfer Case Adapter Replacement for the MP 1222/1225/1226-NQG transfer case
Transfer Case Adapter Replacement for the MP 1625/1626-NQF transfer case
Transfer Case Adapter Replacement for the MP 3023/3024-NQH transfer case

Output Shaft Seal

Procedure

Use the J 45000 to remove the seal. See Special Tools . Use care in order to avoid damaging the output shaft bushing.
Lubricate the seal with clean transmission fluid.
Use the J 36183 to install the seal.

Special Tools

J 45000 Seal Remover. See Special Tools .
J 36183 Seal Installer