Transmission Converter Cover Replacement
WARNING: This page is about a different car, the 2009 GMC Sierra, 2009 GMC Cab & Chassis Sierra, 2009 Chevrolet Silverado, and 2009 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
| Callout | Component Name |
|---|---|
| Preliminary Procedure: Raise the vehicle. Refer to Lifting and Jacking the Vehicle . |
|
| 1 | Torque Converter Cover Bolt
CAUTION:
Refer to Fastener Caution
.
Tighten: 10 N.m (89 lb in) |
| 2 | Torque Converter Cover Tip: Remove the starter. Refer to Starter Replacement (4.8L, 5.3L, 6.0L, and 6.2L) or Starter Replacement (4.3L) or Starter Replacement (6.6L) . |
| 3 | Torque Converter Cover Bolt Tighten: 10 N.m (89 lb in) |
| 4 | Torque Converter Cover |