Propeller Shaft Front Slip Yoke Oil Seal Replacement (Two Wheel Drive)

WARNING: This page is about a different car, the 2009 GMC Sierra, 2009 GMC Cab & Chassis Sierra, 2009 Chevrolet Silverado, and 2009 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of Output Shaft Seal Assembly

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedures Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle . Remove the propeller shaft. Refer to One-Piece Propeller Shaft Replacement or Two-Piece Propeller Shaft Replacement .
1	Propeller Shaft Front Slip Yoke Oil Seal Special Tools DT-48021 Seal Installer (6L90). See Special Tools . J 8092 Driver Handle (6L90) J 38869 Output Shaft Seal Installer (6L80). See Special Tools . J 45000 Seal Remover. See Special Tools .

Callout

Component Name

Preliminary Procedures

Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
Remove the propeller shaft. Refer to One-Piece Propeller Shaft Replacement or Two-Piece Propeller Shaft Replacement .

Propeller Shaft Front Slip Yoke Oil Seal

Special Tools

DT-48021 Seal Installer (6L90). See Special Tools .
J 8092 Driver Handle (6L90)
J 38869 Output Shaft Seal Installer (6L80). See Special Tools .
J 45000 Seal Remover. See Special Tools .