Transmission Converter Cover Replacement
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2008 GMC Yukon XL, 2008 GMC Yukon, 2008 Chevrolet Tahoe, 2008 Chevrolet Suburban, and 2008 Cadillac Escalade EXT. However, it is still accessible from the selected car via links, so may be relevant.
| Callout | Component Name |
|---|---|
| Preliminary Procedure: Raise the vehicle. Refer to Lifting and Jacking the Vehicle . |
|
| 1 | Torque Converter Cover Bolt
NOTE:
Refer to Fastener Notice
.
Tighten: 10 N.m (89 lb in) |
| 2 | Torque Converter Cover Tip: Remove the starter. Refer to Starter Motor Replacement . |
| 3 | Torque Converter Cover Bolt Tighten: 10 N.m (89 lb in) |
| 4 | Torque Converter Cover |