Knee Bolster Replacement (Cadillac)

Fig 1: View Of Knee Bolster Assembly & Components

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedures: Remove the park brake release handle. Refer to Park Brake Release Handle Assembly Replacement .
1	Left Outer Trim Cover Tip: Refer to Instrument Panel Outer Trim Cover Replacement (Cadillac) or Instrument Panel Outer Trim Cover Replacement (Except Cadillac) .
2	Knee Bolster Assembly Screws (Qty: 2) NOTE: Refer to Fastener Notice . Tighten: 2 N.m (18 lb in)
3	Knee Bolster Assembly
4	Retainer Clips (Qty: 4)