Wheelhouse Liner Panel Replacement - Rear
Wheelhouse Liner Panel Replacement - Rear
| Callout | Component Name |
|---|---|
| Preliminary Procedure: Remove the appropriate tire and wheel assembly. Refer to Tire and Wheel Removal and Installation . |
|
| 1 | Rear Wheelhouse Liner Retainer (Qty: 3) |
| 2 | Rear Wheelhouse Liner Screw (Qty: 7)
NOTE:
Refer to Fastener Notice
.
Tighten: 9 N.m (80 lb in) |
| 3 | Rear Wheelhouse Liner Tip: Before attempting to remove the wheelhouse liner remove any plastic retainers and/or bolts passing through or attached to the wheelhouse liner. |