Input and Output Speed Sensor Assembly Removal
WARNING: This page is about a different car, the 2007 GMC Sierra and 2007 Chevrolet Silverado. However, it is still accessible from the selected car via links, so may be relevant.
Input and Output Speed Sensor Assembly Removal
| Callout | Component Name |
|---|---|
| 1 | Bolt M6 x 20 (Qty: 2) |
| 2 | Speed Sensor Electrical Connector Tip: Release the connector lock before disconnecting. |
| 3 | A/Trans Input and Output Speed Sensor Assembly |
| 4 | A/Trans Input and Output Speed Sensor Wiring Harness Clip (Qty: 2) Tip: Inspect the clips and replace if damaged. |