1-2-3-4 Clutch Piston Installation

WARNING: This page is about a different car, the 2007 GMC Sierra and 2007 Chevrolet Silverado. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of 1-2-3-4 Clutch Piston & Components

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
1	1-2-3-4 Clutch Piston
2	1-2-3-4 Clutch Spring NOTE: Ensure the clutch spring is centered on the piston with the tabs facing up. Failure to do so may cause damage to the clutch assembly.
3	1-2-3-4 Clutch Piston Dam Assembly Tip: Lubricate the inner and outer surfaces of the dam assembly with ATF in order to ease installation into the piston. Install the tabs facing up.
4	1-2-3-4 Clutch Piston Dam Retaining Ring NOTE: Use care when compressing the 1-2-3-4 clutch spring and dam assembly. Compressing the dam assembly too much may damage it. NOTE: Refer to Retaining Ring Reuse Notice . Special Tool: J 38734 Intermediate Spring Compressor Adapter. See Special Tools .