LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2007 >> Escalade ESV >> Repair and Diagnosis >> External Pages >> Different car >> Section 914 (Parking Brake System) >> Repair Instructions >> Parking Brake Release Handle Assembly Replacement

Parking Brake Release Handle Assembly Replacement

WARNING: This page is about a different car, the 2007 GMC Sierra and 2007 Chevrolet Silverado. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: View Of Parking Brake Release Handle Assembly
GM1688517Courtesy of GENERAL MOTORS CORP.
Parking Brake Release Handle Assembly Replacement

Callout Component Name
1 Park Brake Release Handle Bolt (Qty: 1)
NOTE: Refer to Fastener Notice .

Tighten:  9 N.m (80 lb in)
2 Park Brake Release Handle Cable
Tip:  Slide the park brake release cable forward to remove it from the park brake module.
3 Park Brake Release Handle
scientia non olet · About LEMON Manuals