LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2007 >> Escalade ESV >> Repair and Diagnosis >> External Pages >> Different car >> Section 907 (Interior Trim And Paneling) >> Repair Instructions >> Rear Window Lower Garnish Molding Replacement (Regular Cab)

Rear Window Lower Garnish Molding Replacement (Regular Cab)

WARNING: This page is about a different car, the 2007 GMC Sierra and 2007 Chevrolet Silverado. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: View Of Rear Window Lower Garnish Molding (Regular Cab)
GM1714408Courtesy of GENERAL MOTORS CORP.
Rear Window Lower Garnish Molding Replacement (Regular Cab)

Callout Component Name
1 Rear Window Lower Garnish Molding Assembly
Tip: 
  1. Remove the front and rear seat belt guide covers.
  2. Ensure webbing is routed through guide loop.
  3. Route belt webbing through garnish molding.
  4. Drop garnish molding over guide loop and then secure.
2 Rear Window Lower Garnish Molding Retainer Clip (Qty: 14)
scientia non olet · About LEMON Manuals