Rear Seat Separation (Extended Cab w/A68)

WARNING: This page is about a different car, the 2007 GMC Sierra and 2007 Chevrolet Silverado. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of Rear Seat Assemblies & Riser Bolts

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
1	Rear Seat Riser Bolt (Qty: 2) NOTE: Refer to Fastener Notice . Tip: If separating the seats in the vehicle, fold the seat bottom up to gain access to the bolts. Tighten: 9 N.m (80 lb ft)
2	Rear Seat Assembly - 40 percent
3	Rear Seat Assembly - 60 percent