LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2007 >> Escalade ESV >> Repair and Diagnosis >> External Pages >> Different car >> Section 1847 (Antilock Brake System - Non-Hybrid Less Than 3900 Kg (8600 Lb) GVW) >> Diagnostic Information and Procedures >> StabiliTrak Indicator Malfunction >> Circuit/System Verification

Circuit/System Verification

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2011 GMC Yukon XL, 2011 GMC Yukon, 2011 Chevrolet Tahoe, 2011 Chevrolet Suburban, and 2011 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
  1. Ignition ON.
  2. Verify the scan tool BCM Traction Control Switch parameter changes between Active and Inactive while pressing and releasing the traction control switch.
    • If the parameter does not change 

      Refer to Circuit/System Testing below.

    • If the parameter changes 
  3. Verify the traction/stability control indicator turns ON and OFF when commanding the Instrument Panel Cluster, Lamp Test ON and OFF with a scan tool.
    • If the indicator does not turn ON and OFF 

      Replace the IPC.

    • If the indicator turns ON and OFF 
  4. All OK.
scientia non olet · About LEMON Manuals