LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2007 >> Escalade ESV >> Repair and Diagnosis >> External Pages >> Different car >> Section 1847 (Antilock Brake System - Non-Hybrid Less Than 3900 Kg (8600 Lb) GVW) >> Diagnostic Information and Procedures >> DTC C0161 >> Circuit/System Description

Circuit/System Description

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2011 GMC Yukon XL, 2011 GMC Yukon, 2011 Chevrolet Tahoe, 2011 Chevrolet Suburban, and 2011 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.

The electronic brake control module (EBCM) monitors the brake pressure sensor voltage, vehicle speed, and a serial data message from the body control module (BCM) that the brake pedal is either applied or released. When the vehicle is stopping the EBCM detects the brake pressure sensor voltage increases and correlates the readings to the serial data message from the BCM that the brake pedal is applied, and the vehicle is slowing down, or when the vehicle is accelerating, the brake pedal is released and brake pressure sensor voltage returns to 0 volts.

scientia non olet · About LEMON Manuals