LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2007 >> Escalade ESV >> Repair and Diagnosis >> External Pages >> Different car >> Section 1085 (Automatic Transmission - 4L60-E/4L65-E/4L70-E - Removal & Installation, Service, Overhaul, Troubleshooting & Diagnosis) >> Off-Vehicle Repair Instructions >> Output Shaft Installation >> Installation

Output Shaft Installation: Installation

WARNING: This page is about a different car, the 2008 GMC Sierra and 2008 Chevrolet Silverado. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Output Shaft
    GM588787Courtesy of GENERAL MOTORS CORP.
    IMPORTANT: It is important to note that the input shaft may need a light tap to fully seat into position. If the input shaft is not completely engaged, the output shaft to input carrier retainer (661) will not seat.
  1. Install the output shaft (687).
    2. Fig 2: Identifying Special Tool J29837-A & Output Shaft O-Ring Seal
    GM1730029Courtesy of GENERAL MOTORS CORP.
  2. Install the J 29837-A  as shown. See Special Tools . Support the output shaft (687) with adjustable stop (1).
scientia non olet · About LEMON Manuals