LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2007 >> Escalade ESV >> Repair and Diagnosis >> Body & Frame >> Exterior/Interior Trim >> Interior Trim And Paneling >> Repair Instructions >> Garnish Molding Replacement - Windshield Pillar

Garnish Molding Replacement - Windshield Pillar

Fig 1: View Of Windshield Side Garnish Molding Assembly
GM1658700Courtesy of GENERAL MOTORS CORP.
Garnish Molding Replacement - Windshield Pillar

Callout Component Name

Preliminary Procedures

  1. Disable roof rail SIR system. Refer to SIR Disabling and Enabling .
  2. Remove front assist handle (passenger side only). Refer to Assist Handle Replacement - Front .
1 Windshield Side Garnish Molding Cover
2 Windshield Side Garnish Molding Screw
NOTE: Refer to Fastener Notice .

Tighten:  2 N.m (18 lb in)
3 Windshield Side Garnish Molding Assembly
Tip: 
  1. Tabs must be installed prior to retainers.
  2. Tabs to be fully seated in I/P trim panel retainer and valance panel.
  3. Disconnect electrical connectors.
4 Windshield Side Garnish Molding Retainer (Qty: 2)
scientia non olet · About LEMON Manuals