Rear Bumper Fascia Extension Replacement

Rear Bumper Fascia Extension Replacement


Removal Procedure





1.Remove the push-in retainers (1) securing the rear fascia extension to the vehicle.

2.Remove the screws (2) securing the rear fascia extension to the vehicle.

3.Remove the rear fascia extension from the vehicle.

Installation Procedure





1.Position the rear fascia extension to the vehicle.

2.Install the push-in retainers (1) that secure the rear fascia extension to the vehicle.

Notice:Refer to Fastener Notice .

3.Install the screws (2) that secure the rear fascia extension to the vehicle.

TightenTighten the screws to 6 N �m (53 lb in).