LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2007 >> CTS V6-2.8L >> Repair and Diagnosis >> Powertrain Management >> Transmission Control Systems >> Sensors and Switches - Transmission and Drivetrain >> Sensors and Switches - A/T >> Brake Switch - TCC >> Service and Repair

Brake Switch - TCC: Service and Repair



Torque Converter Clutch/Cruise Control Release Switch Replacement

Removal Procedure

1. Remove the left closeout/insulator panel.




2. Remove the torque converter clutch/cruise release switch (3) by pulling the upper switch out of the retainer.
3. Disconnect the electrical connector from the torque converter clutch/cruise release switch (3).

Installation Procedure




1. Connect the electrical connector to the torque converter clutch/cruise release switch (3).
2. Install the torque converter clutch/cruise release switch (3) into the upper retainer.
3. Adjust the torque converter clutch/cruise release switch. Refer to Torque Converter Clutch/Cruise Control Release Switch Adjustment.
4. Install the left closeout/insulator panel.

scientia non olet · About LEMON Manuals