Brake Pad: Specifications

Disc Brake Component Specifications (J56)

Front Brake Pads
Taper 0.15 mm (0.006 in)
Rotor Maximum Allowable Assembled Lateral Runout 0.06 mm (0.002 in)
Rotor Maximum Allowable Scoring 1.50 mm (0.059 in)
Rotor Maximum Allowable Thickness Variation 0.025 mm (0.001 in)

Rear Brake Pads
Taper 0.15 mm (0.006 in)
Rotor Maximum Allowable Assembled Lateral Runout 0.06 mm (0.002 in)
Rotor Maximum Allowable Scoring 1.50 mm (0.059 in)
Rotor Maximum Allowable Thickness Variation 0.025 mm (0.001 in)

Disc Brake Component Specifications (JE5, JL9)

Front Brake Pads
Taper 0.15 mm (0.006 in)

Rear Brake Pads
Taper 0.15 mm (0.006 in)