Digital Radio Antenna Cable Replacement

Digital Radio Antenna Cable Replacement

Removal Procedure




1. Remove the rear shelf panel.
2. Remove the drivers side sail panel.
3. Lower the rear of the headliner to gain access to the satellite radio coax cable. Refer to Headlining Trim Panel Replacement.
4. Disconnect the electrical connectors.
5. Remove the coax cable.

Installation Procedure




1. Install the coax cable.
2. Connect the electrical connectors.
3. Install the headliner. Refer to Headlining Trim Panel Replacement.
4. Install the drivers side sail panel.
5. Install the rear shelf panel.